|
Libraries
|
Error codes for the Data API (starts at 15001). More...
Macros | |
| #define | TREK_DATA_VALUE_RANGE_ERROR 15001 |
| The value entered does not meet range criteria for the method. | |
| #define | TREK_DATA_EXT_NUM_SAMP_PARAM_NOT_FOUND 15002 |
| Could not find the external number of samples parameter. Check database definition. | |
| #define | TREK_DATA_DATA_WILL_NOT_FIT 15003 |
| The data type is not capable of holding the value. | |
| #define | TREK_DATA_INVALID_START_BIT 15004 |
| Invalid start bit for a parameter (past end of allowed packet). | |
| #define | TREK_DATA_ALREADY_EXISTS 15005 |
| The item specified already exists. | |
| #define | TREK_DATA_END_OF_LIST 15006 |
| No more items are in the list. | |
| #define | TREK_DATA_DOES_NOT_EXIST 15007 |
| The specified item does not exist. Names are case-sensitive. | |
| #define | TREK_DATA_INVALID_DATA_TYPE 15008 |
| Data type is not valid. | |
| #define | TREK_DATA_INVALID_LENGTH_FOR_DATA_TYPE 15009 |
| The data type does not support the specified length. | |
| #define | TREK_DATA_POSSIBLE_LOSS_OF_DATA 15010 |
| (Considered Success) Function or method call worked, but there may be loss of data (e.g., used a float to set an integer). | |
| #define | TREK_DATA_INVALID_INPUT_FOR_TYPE 15011 |
| The data type does not allow this method to be used for setting the value. | |
| #define | TREK_DATA_INVALID_BYTE_ORDER 15012 |
| The byte order specified is not allowed based on the data type and length specified. For example, only BIG_ENDIAN_BYTE_ORDER is allowed for data types that are not on a byte boundary. | |
| #define | TREK_DATA_SAMPLE_DOES_NOT_EXIST 15013 |
| The sample number specified is greater than the number of samples available for the parameter. | |
| #define | TREK_DATA_INVALID_SAMPLE_NUMBER 15014 |
| Valid sample numbers are greater than 0. | |
| #define | TREK_DATA_UNEXPECTED_ERROR 15015 |
| Indicates a likely bug in the TReK code. Please notify the TReK Help desk if this occurs. | |
| #define | TREK_DATA_INVALID_VALUE 15016 |
| Value is not valid (in a valid range). | |
| #define | TREK_DATA_FIXED_LENGTH_REQUIRED 15017 |
| Data type cannot be variable length. | |
| #define | TREK_DATA_VALUE_MUST_BE_POSITIVE 15018 |
| The value passed must be a non-negative number. | |
| #define | TREK_DATA_INVALID_CHAR_INPUT 15019 |
| The string contains a character that is invalid. | |
| #define | TREK_DATA_INVALID_INPUT_FOR_DATA_TYPE 15020 |
| The data type does not allow this method to be used for setting the value. | |
| #define | TREK_DATA_WILL_NOT_FIT 15021 |
| Data is too long for the available space. | |
| #define | TREK_DATA_INVALID_DATA_FORMAT 15022 |
| Data format is not valid. This indicates a likely bug in the TReK code. Please notify the TReK help desk if this occurs. | |
| #define | TREK_DATA_NOT_BOOLEAN_TYPE 15023 |
| The input string is not a boolean string (true or false). | |
| #define | TREK_DATA_NOT_MODIFIABLE 15024 |
| The value cannot be modified. A value marked as unmodifiable that has no value can be set once. | |
| #define | TREK_DATA_VALUE_LESS_THAN_MIN 15025 |
| Input value is too small for the data type or is less than allowed by the low range. | |
| #define | TREK_DATA_VALUE_EXCEEDS_MAX 15026 |
| Input value is too large for the data type or is more than allowed by the high range. | |
| #define | TREK_DATA_ZONE_ALREADY_EXISTS 15028 |
| The specified zone (header, data, or trailer) is already populated. | |
| #define | TREK_DATA_ERROR_BUILDING_HEADER_ZONE 15029 |
| The header zone of the packet could not be build. Likely causes include parameter values not set. | |
| #define | TREK_DATA_ERROR_BUILDING_DATA_ZONE 15030 |
| The data zone of the packet could not be build. Likely causes include parameter values not set. | |
| #define | TREK_DATA_ERROR_BUILDING_TRAILER_ZONE 15031 |
| The trailer zone of the packet could not be build. Likely causes include parameter values not set. | |
| #define | TREK_DATA_NOT_ENOUGH_SPACE 15032 |
| The specified data buffer is not larger enough to hold the data. | |
| #define | TREK_DATA_MORE_THAN_ONE_PARAMETER 15033 |
| The reference name appears more than once in the packet hierarchy. Use the fully-qualified name instead. | |
| #define | TREK_DATA_ERROR_BUILDING_LEN_PARAM 15034 |
| Could not build the length parameter for the packet. Could occur if length parameter is deleted from the packet. | |
| #define | TREK_DATA_LEN_ZONE_ERROR 15035 |
| Zone is invalid for length. This indicates a likely bug in the TReK code. Please notify the TReK help desk if this occurs. | |
| #define | TREK_DATA_ERROR_BUILDING_COUNTER_PARAM 15036 |
| Could not build the counter parameter for the packet. Could occur if counter parameter is deleted from the packet. | |
| #define | TREK_DATA_ERROR_BUILDING_TIME_PARAM 15037 |
| Could not build the time stamp parameter for the packet. Could occur if time stamp parameter is deleted from the packet. | |
| #define | TREK_DATA_ERROR_BUILDING_CHECKSUM_PARAM 15038 |
| Could not build the checksum parameter for the packet. Could occur if checksum parameter is deleted from the packet. | |
| #define | TREK_DATA_UNKNOWN_LIMIT_TYPE 15039 |
| Unknown limit type. This indicates a possible bug in the TReK code. Please notify the TReK help desk if this occurs. | |
| #define | TREK_DATA_CALIBRATOR_NOT_DEFINED 15040 |
| A calibrator is not defined for the parameter. | |
| #define | TREK_DATA_ENUMERATOR_NOT_DEFINED 15041 |
| An enumerator is not defined for the parameter. | |
| #define | TREK_DATA_RANGE_ERROR 15042 |
| The data is out of the allowed range. | |
| #define | TREK_DATA_CALIBRATION_ERROR 15043 |
| An error occurred when attempting to calibrate the parameter. | |
| #define | TREK_DATA_INCORRECT_LIMIT_TYPE 15044 |
| The specified limit type is incorrect in this context. | |
| #define | TREK_DATA_LIMIT_LEVEL_NOT_IN_USE 15045 |
| The specified limit level is not currently in use. | |
| #define | TREK_DATA_LIMIT_VALUE_TOO_SMALL 15046 |
| The limit value is too small for this context. | |
| #define | TREK_DATA_LIMIT_VALUE_TOO_LARGE 15047 |
| The limit value is too large for this context. | |
| #define | TREK_DATA_LIMIT_LEVEL_ERROR 15048 |
| The value is not a valid limit level. | |
| #define | TREK_DATA_NEG_LEN_ERROR 15049 |
| The calculated length is negative. This likely indicates that the input data is too short or the offset defined for the length is incorrect. | |
| #define | TREK_DATA_NO_VALUE 15050 |
| Parameter has no value defined. | |
| #define | TREK_DATA_NO_PARENT 15051 |
| Parent packet not defined. Likely an initialization problem. | |
| #define | TREK_DATA_EXT_NUM_SAMP_VALUE_FAIL 15052 |
| Could not get a value for the external number of samples. | |
| #define | TREK_DATA_EXT_NUM_SAMP_EXTRACT_FAIL 15053 |
| Could not extract the value for the external number of samples. | |
| #define | TREK_DATA_EXT_NUM_SAMP_BAD_VALUE 15054 |
| The external number of samples is either zero or too large. | |
| #define | TREK_DATA_ENUMERATION_DOES_NOT_EXIST 15055 |
| The value does not have an associated enumeration defined. | |
| #define | TREK_DATA_MISSING_ZONE 15056 |
| The zone does not currently exist. | |
| #define | TREK_DATA_ERROR_BUILDING_IDENTIFIER 15057 |
| Could not build an identifier parameter for the packet. | |
| #define | TREK_DATA_EXT_STATUS_PARAM_NOT_FOUND 15058 |
| Could not find the external status parameter. Check database definition. | |
| #define | TREK_DATA_EXT_STATUS_VALUE_FAIL 15059 |
| Could not get a value for the external status. | |
| #define | TREK_DATA_EXT_STATUS_EXTRACT_FAIL 15060 |
| Could not extract the value for the external status. | |
| #define | TREK_DATA_CONVERSION_ERROR 15061 |
| Data has error making it unconvertable. | |
| #define | TREK_LAST_BIT_ERROR 15062 |
| Last bit is past the end of the packet. | |
| #define | TREK_DATA_COULD_NOT_LOAD_LIBRARY 15063 |
| Could not load user created library. | |
| #define | TREK_DATA_COULD_NOT_FIND_LIB_FUNCTION 15064 |
| Could not find function in user library. | |
| #define | TREK_DATA_INVALID_LENGTH 15065 |
| The length for the parameter is not correct in this context. | |
| #define | TREK_DATA_VAR_LEN_NUM_SAMPLE_ERROR 15066 |
| Variable length data must have a single sample. | |
| #define | TREK_DATA_UNKNOWN_ZONE 15067 |
| Could not convert a zone string to an enumerator. Possibly indicates a TReK bug. Please contact the TReK help desk. | |
| #define | TREK_DATA_UNKNOWN_ID_TYPE 15068 |
| Could not convert an identifier type string to an enumerator. Possibly indicates a TReK bug. Please contact the TReK help desk. | |
| #define | TREK_DATA_UNKNOWN_CHECKSUM_POINT 15070 |
| Could not convert a checksum point string to an enumerator. Possibly indicates a TReK bug. Please contact the TReK help desk. | |
| #define | TREK_DATA_UNKNOWN_CHECKSUM_TYPE 15071 |
| Could not convert a checksum type string to an enumerator. Possibly indicates a TReK bug. Please contact the TReK help desk. | |
| #define | TREK_DATA_FILE_ACCESS_ERROR 15072 |
| Could not access file. May not have read or write privileges on the directory or file. | |
| #define | TREK_DATA_NO_VERSION_INFO 15073 |
| Version information was required, but not available. Likely cause is an XML file that was edited improperly. | |
| #define | TREK_DATA_XML_FMT_ERROR 15074 |
| An element in XML was not properly formatted. | |
| #define | TREK_DATA_UNEXPECTED_XML_ELEMENT 15075 |
| An unexpected element was found in the XML. | |
| #define | TREK_DATA_UNKNOWN_XML_VERSION 15076 |
| The XML version is likely from a new version of TReK. Check that you are using the latest version of code for compile, link, and run. | |
| #define | TREK_DATA_COULD_NOT_CALC_START_PT 15077 |
| Could not calculate the start point for the checksum. Most likely cause is that two or more 'zones' have variable length data which is not supported at this time. | |
| #define | TREK_DATA_COULD_NOT_CALC_END_PT 15078 |
| Could not calculate the start point for the checksum. Most likely cause is that two or more 'zones' have variable length data which is not supported at this time. | |
| #define | TREK_DATA_CHECKSUM_START_PT_ERROR 15079 |
| The calculated start point for the checksum is either prior to the start of the packet or past the end of it. | |
| #define | TREK_DATA_CHECKSUM_END_PT_ERROR 15080 |
| The calculated end point for the checksum is either prior to the start of the packet or past the end of it. | |
| #define | TREK_DATA_CHECKSUM_PT_SWAP_ERROR 15081 |
| The calculated end point is not after the calculated start point for the checksum. | |
| #define | TREK_DATA_HASH_SIZE_ERROR 15082 |
| Indicates that a third-party library used for checksum calculations has changed. Please report this error to the TReK Help Desk. | |
| #define | TREK_DATA_TIME_ERROR 15083 |
| Error retrieving time. | |
| #define | TREK_DATA_FRACTIONAL_TIME_VALUE_ERROR 15084 |
| Fractional seconds is greater than allowed for current time settings. | |
| #define | TREK_DATA_NEG_TIME_NOT_ALLOWED 15085 |
| Negative time is not allowed. | |
| #define | TREK_DATA_TIME_LENGTH_ERROR 15086 |
| Time strings must be 19 characters or between 21 and 32 characters inclusive. | |
| #define | TREK_DATA_TIME_STRING_FORMAT_ERROR 15087 |
| Time string format is incorrect. See allowed formats in trek::TrekTime. | |
| #define | TREK_DATA_TIME_TOO_SOON 15088 |
| Times prior to midnight January 1, 1970 are not supported. | |
| #define | TREK_DATA_ILLEGAL_MONTH 15089 |
| The month value must be between 1 and 12 inclusive. Note: Must represent months prior to 10 with a leading zero (e.g., 03). | |
| #define | TREK_DATA_ILLEGAL_DAY 15090 |
| The day value is not correct for the specified month. | |
| #define | TREK_DATA_ILLEGAL_HOURS 15091 |
| The hour value must be between 0 and 23 inclusive. Note: Must represent hours prior to 10 with a leading zero (e.g., 02). | |
| #define | TREK_DATA_ILLEGAL_MINUTES 15092 |
| The minute value must be between 0 and 59 inclusive. Note: Must represent minutes prior to 10 with a leading zero (e.g., 07). | |
| #define | TREK_DATA_ILLEGAL_SECONDS 15093 |
| The second value must be less than 60. Fractional second values are allowed, but seconds prior to 10 with a leading zero (e.g., 01). | |
| #define | TREK_DATA_NULL_PTR 15094 |
| Returned when one or more arguments for a function are unexpectedly NULL. | |
| #define | TREK_DATA_BAD_INDEX 15095 |
| The index specified does not exist. | |
| #define | TREK_DATA_PACKET_LENGTH_ERROR 15096 |
| The packet length has an error. For extraction this likely indicates the data being extracted is incomplete. | |
| #define | TREK_DATA_CHECKSUM_ERROR 15097 |
| The checksum in the packet does not match the calculated checksum. | |
| #define | TREK_DATA_MUST_BE_NON_ZERO 15098 |
| The data value cannot be zero. | |
| #define | TREK_DATA_MUST_HAVE_VALUE 15099 |
| Either a default or expected value is required. | |
| #define | TREK_DATA_NOT_IN_ZONE 15101 |
| The parameter is not in the zone specified. | |
| #define | TREK_DATA_MOD_ZERO 15102 |
| The modulo value must be greater than zero. | |
| #define | TREK_DATA_REMAINDER_TOO_LARGE 15103 |
| The remainder value must be less than the modulo value. | |
| #define | TREK_DATA_VALIDATION_ERROR 15104 |
| Returned if Validation fails. A validation string containing detailed errors is available. | |
| #define | TREK_DATA_NO_IDENTIFIER 15105 |
| An identifier could not be found when required. | |
| #define | TREK_DATA_ID_MISMATCH 15106 |
| There are one or more identifiers that do not match. | |
| #define | TREK_DATA_NOT_ALLOWED 15107 |
| Whatever you are trying isn't allowed. | |
| #define | TREK_DATA_TIME_TOO_LATE 15108 |
| Times past December 31, 2099 are not supported. | |
| #define | TREK_DATA_IS_INVALID 15109 |
| The data is currently invalid and must be validated prior to use of this method. | |
| #define | TREK_DATA_INCORRECT_SWITCH_TYPE 15110 |
| The configured switch type is incorrect for this method. | |
| #define | TREK_DATA_LOW_TO_HIGH 15111 |
| The low value must be greater than the high value. | |
| #define | TREK_DATA_NEED_UNIQUE_RANGE 15112 |
| The range overlaps with a range that is already defined. | |
| #define | TREK_DATA_SWITCH_ERROR 15113 |
| An error occurred when switching sets. | |
| #define | TREK_DATA_BAD_SYLLABLE_NUMBER 15114 |
| Syllable number exceeds the number of syllables defined. | |
| #define | TREK_DATA_VAR_LEN_SYLLABLE_ERROR 15115 |
| Variable length data cannot have multiple syllables. | |
Error codes for the Data API (starts at 15001).